Chapter 5 Configuring Ap Router & Ap Client Router Mode; Login - TP-Link TL-WA7510N User Manual

TL-WA7510N
Chapter 5
Configuring AP Router & AP Client Router Mode
This chapter will show each Web page's key functions and the configuration way in AP Router
mode as well as AP Client Router mode.
Note:
The setting Web pages of these two modes are mostly the same, with only three differences:
1. In AP Router Mode, there is one more WAN connection type, Big Pond Cable, than that in AP Client
Router Mode.（See
2. In AP Client Router Mode, there is one more submenu under Wireless main menu, Antenna
Alignment, than that in AP Router Mode, as shown in Figure 5-24 & Figure 5-25. (See
3. The Wireless Settings page in AP Router mode and that in AP Client Router mode are something
different, as shown in Figure 5-26 & Figure 5-27. (See

5.1 Login

Open your web browser. Type in the default address http://192.168.1.254 in the address field of
web browser and then press Enter.
Enter admin for the User Name and Password (both in lower case letters) in Figure 5-2 below.
Then click OK or press Enter.
5GHz 150Mbps Outdoor Wireless Access Point User Guide
Section 5.6.2）
Figure 5-1 Login to the Device
Figure 5-2 Login Windows
Section 5.7.1)
75
Section 5.7)