TP-Link TL-WA7510N User Manual page 127

TL-WA7510N
Once configured, operation is as follows:
1. A local host makes an outgoing connection to an external host using a destination port
number defined in the Trigger Port field.
2. The Device records this connection, opens the incoming port or ports associated with this
entry in the Port Triggering table, and associates them with the local host.
3. When necessary, the external host will be able to connect to the local host using one of the
ports defined in the Incoming Ports field.
Rules:
Trigger Port - The port for outgoing traffic. An outgoing connection using this port will
Trigger this rule.
Trigger Protocol - The protocol used for Trigger Ports, either TCP, UDP, or All (all
protocols are supported by the Device.).
Incoming Port - The port or port range used by the remote system when it responds to the
outgoing request. A response using one of these ports will be forwarded to the PC which
triggered this rule. You can input at most 5 groups of ports (or port sections). Every group
of ports must be separated with ",". For example, 2000-2038, 2046, 2050-2051, 2085,
3010-3030.
Incoming Protocol - The protocol used for Incoming Port, either TCP, UDP, or ALL (all
protocols are supported by the Device.).
Status - The status of this entry. Enabled means the Port Triggering entry is enabled.
Modify - To modify or delete an existing entry.
Common Applications - Some popular applications already listed in the from the
pull-down list of Incoming Protocol.
5GHz 150Mbps Outdoor Wireless Access Point User Guide
Figure 5-47 Port Triggering
119