Dhcp - TP-Link TL-WA7510N User Manual

TL-WA7510N
MAC Address - the connected wireless station's MAC address.
Current Status - the connected wireless station's running status, one of STA-AUTH /
STA-ASSOC / STA-JOINED / WPA / WPA-PSK / WPA2 / WPA2-PSK / AP-UP / AP-DOWN /
Disconnected.
Received Packets - packets received by the station.
Sent Packets - packets sent by the station.
Belong To - the SSID that station belong to.
You cannot change any of the values on this page. To update this page and to show the current
connected wireless stations, click on the Refresh button.
If the numbers of connected wireless stations go beyond one page, click the Next button to go to
the next page and click the Previous button to return to the previous page.
Note:
This page will be refreshed automatically every 5 seconds.

4.8 DHCP

The DHCP (Dynamic Host Configuration Protocol) Server will automatically assign dynamic IP
addresses to the computers on the network. This protocol simplifies network management and
allows new wireless devices to receive IP addresses automatically without the need to manually
assign new IP addresses.
There are three submenus under the DHCP menu (shown as Figure 4-30): DHCP Settings,
DHCP Clients List and Address Reservation. Clicking any of them will enable you to configure
the corresponding function. The detailed explanations for each submenu are provided below.
5GHz 150Mbps Outdoor Wireless Access Point User Guide
Figure 4-29 Wireless Statistics
61