1. Manuals
  2. Brands
  3. TP-Link Manuals
  4. Wireless Access Point
  5. TL-WA701ND
  6. User manual

TP-Link TL-WA701ND User Manual

Hide thumbs Also See for TL-WA701ND:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual, Installation Manual
TL-WA701ND
150Mbps Wireless N Access Point
TL-WA801ND
300Mbps Wireless N Access Point
TL-WA901ND
450Mbps Wireless N Access Point
REV3.1.0
1910011618

Advertisement

Table of Contents
loading

Related Manuals for TP-Link TL-WA701ND

Summary of Contents for TP-Link TL-WA701ND

  • Page 1 TL-WA701ND 150Mbps Wireless N Access Point TL-WA801ND 300Mbps Wireless N Access Point TL-WA901ND 450Mbps Wireless N Access Point REV3.1.0 1910011618...
  • Page 2 Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD.

  • Page 3: Fcc Statement

    FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

  • Page 4: Canadian Compliance Statement

    RF Exposure Information This device meets the EU requirements (1999/5/EC Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. The device complies with RF specifications when the device used at 20 cm from your body. Canadian Compliance Statement This device complies with Industry Canada license-exempt RSSs.

  • Page 5: Safety Information

    第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通行；經發現有干擾現象時，應立 即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信規定作業之無線電信。低功率 射頻電機需忍受合法通信或工業、科學以及醫療用電波輻射性電機設備之干擾。 BSMI Notice 安全諮詢及注意事項  請使用原裝電源供應器或只能按照本產品注明的電源類型使用本產品。  清潔本產品之前請先拔掉電源線。請勿使用液體、噴霧清潔劑或濕布進行清潔。  注意防潮，請勿將水或其他液體潑灑到本產品上。  插槽與開口供通風使用，以確保本產品的操作可靠並防止過熱，請勿堵塞或覆蓋開口。  請勿將本產品置放於靠近熱源的地方。除非有正常的通風，否則不可放在密閉位置中。  請不要私自打開機殼，不要嘗試自行維修本產品，請由授權的專業人士進行此項工作。 Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам нормативних документів та вимогам, що передбачені чинними законодавчими актами України. Safety Information When product has power button, the power button is one of the way to shut off the product;...
  • Page 6 Explanation of the symbols on the product label Symbol Explanation DC voltage RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.

  • Page 7: Table Of Contents

    CONTENTS Package Contents ....................1 Chapter 1 Introduction ................... 2 Product Overview .................... 2 Conventions ....................2 Main Features ....................3 Appearance ..................... 3 1.4.1 The Front Panel ....................3 1.4.2 The Rear Panel....................4 Chapter 2 Hardware Installation ................6 Before You Begin ....................
  • Page 8 4.7.6 Backup & Restore .................... 58 4.7.7 Reboot ......................59 4.7.8 Password ......................59 4.7.9 System Log ...................... 60 Appendix A: Application Example ................ 62 Appendix B: Factory Defaults ................65 Appendix C: Troubleshooting ................66 Appendix D: Specifications ................... 67 Appendix E: Glossary ....................

  • Page 9: Package Contents

    One TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point  One Power Injector  Ethernet Cable  One Power Adapter for TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point  Quick Installation Guide   Note: Make sure that the package contains the above items. If any of the listed items are damaged or...

  • Page 10: Chapter 1 Introduction

    AP. Specifications can be found on the product page at http://www.tp-link.com.  A Technical Support Forum is provided for you to discuss our products at http://forum.tp-link.com.  Our Technical Support contact information can be found at the Contact Technical Support ...

  • Page 11: Main Features

    2 minutes after WPS function is enabled. A wireless device is connecting to the network by WPS function. This Flashing process will last in first 2 minutes. Table 1-1 Note: For TL-WA701ND, there is another System LED: Name Status Indication The device has a system error.

  • Page 12: The Rear Panel

    WPS/RESET: This button is used for both WPS and Reset function. To use the WPS function, press it for less than five seconds; to use the RESET function, press it for more than five seconds. Note: For TL-WA701ND/TL-WA801ND, there is one WPS button and one RESET button.  Used as RESET button: There are two ways to reset to the device's factory defaults: 1) Use the Factory Defaults function on System Tools ->...
  • Page 13 TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide  Used as WPS button: If you have client devices, such as wireless adapters, that support Wi-Fi Protected Setup, then you can press this button to quickly establish a connection between the Access Point and client devices and automatically configure wireless security for your wireless network.

  • Page 14: Chapter 2 Hardware Installation

    TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide Chapter 2 Hardware Installation 2.1 Before You Begin Please read this User Guide carefully before installing and using the equipment. The operating distance range of your wireless connection can vary significantly depending on the physical position of the wireless devices.
  • Page 15 TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide Figure 2-1 The Example of Infrastructure Network Incorporating the TL-WA901ND To establish a typical connection of the AP, please take the following steps: 1. Connect the Cable or DSL modem to a Router.
  • Page 16 TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide  Note: The diameter of the screw, 3.5mm<D<7.8mm, and the distance of two screws is 107.5mm. The screw that project from the wall need around 4mm based, and the length of the screw need to be...

  • Page 17: Chapter 3 Quick Installation Guide

    TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide Chapter 3 Quick Installation Guide This chapter will guide you to configure your PC to communicate with the AP and to configure and manage the AP easily with a Web-based utility. 3.1 Quick Setup With a Web-based utility, it is easy to configure and manage the AP device.
  • Page 18 TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide  Note: If the above screen does not prompt, it means that your web-browser has been set to a proxy. Go to Tools menu>Internet Options>Connections>LAN Settings, in the screen that appears, cancel the Using Proxy checkbox, and click OK to finish it.
  • Page 19 TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide When you choose Access Point mode, the Wireless Settings page will be shown in Figure 3-5. Figure 3-5 Wireless Setting - Access Point mode Create an easy-to-remember and distinguish name for your wireless network, write it into Wireless Network Name(SSID).
  • Page 20 TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide Figure 3-7 Wireless Setting – Repeater (Range Extender) mode When you choose Bridge with AP mode, the AP will detect the wireless networks in your neighborhood, and then the window displaying a list of available SSIDs will appear in Figure 3-8.
  • Page 21 TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide Figure 3-9 Wireless Setting – Bridge with AP mode When you choose Client mode, the AP will detect the wireless networks in your neighborhood, and then the window displaying a list of available SSIDs will appear in Figure 3-10.
  • Page 22 TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide Figure 3-11 Wireless Setting – Client mode When you choose Multi-SSID mode, the Wireless Settings page will be shown in Figure 3-12. Figure 3-12 Wireless Setting – Multi-SSID mode You are suggested to implement Multi-SSID function with a switch that supports Tag VLAN feature.
  • Page 23 TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide Figure 3-13 Network Setting  Note: These settings are only for basic wireless parameters, for advanced settings, please refer to Network. Click the Next button. You will then see the Finish page. Here takes the settings for Access Point mode for example.

  • Page 24: Chapter 4 Configure The Device

    TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide Chapter 4 Configure the Device This Chapter describes how to configure your Access Point via the web-based management page. The AP is easy to configure and manage with the Web-based (Internet Explorer, Netscape ®...

  • Page 25: Status

    TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide 4.2 Status Selecting Status will enable you to view the AP’s current status and configuration, all of which is read-only. Figure 4-3 Device Status Firmware Version - This field displays the current firmware version of the AP.

  • Page 26: Quick Setup

    TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide System Up Time - This filed displays the run time of the AP since it’s powered on or reset.   Note: If you select Client mode in Figure 4-14, the wireless status in Figure 4-3 will change, similar to the...
  • Page 27 TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide device can be found in the label or User Guide. Restore PIN - Restore the PIN of the device to its default.  Gen New PIN - Click this button, and then you can get a new random value for the device's ...
  • Page 28 TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide The WPS Configuration Screen of Wireless Adapter Method Two: Step 1: Press the WPS/RESET button on the rear panel of the device. Step 2: For the configuration of the wireless adapter, please choose “Push the button on my access point or wireless router.”...
  • Page 29 TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide The WPS Configuration Screen of Wireless Adapter Method Three: Step 1: Keep the default WPS Status as Enabled and click the Add device button in Figure 4-5, then the following screen will appear.
  • Page 30 TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide The WPS Configuration Screen of Wireless Adapter Step 4: Wait for a while until the next screen appears. Click OK to complete the WPS configuration. The WPS Configuration Screen of Wireless Adapter II. By PIN If the new device supports Wi-Fi Protected Setup and the PIN method, you can add it to the network by PIN with the following two methods.
  • Page 31 TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide Figure 4-7 Enter the PIN Step 2: Choose “Enter the new device's PIN” and enter the PIN code （take 16952898 for example） of the wireless adapter in the field after PIN as shown in the figure above. Then click Connect.

  • Page 32: Network

    TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide enter the PIN code of the AP into the field after “Access Point PIN”. Then click Next. The WPS Configuration Screen of Wireless Adapter  Note: The default PIN code of the AP can be found in its label or the WPS configuration screen as Figure 4-5 .

  • Page 33: Lan

    TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide 4.5.1 LAN The Network option allows you to customize your local network manually by changing the default settings of the AP. Selecting Network will enable you to configure the IP parameters of Network on this page.
  • Page 34 TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide Figure 4-9 DHCP Settings DHCP Server - Selecting the radio button before Disable/Enable will disable/enable the  DHCP server on your AP. The default setting is Enable. If you disable the Server, you must have another DHCP server within your network or else you must manually configure the computer.

  • Page 35: Dhcp Client List

    TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide 4.5.3 DHCP Client List Selecting DHCP > DHCP Client List will enable you to view the Client Name, MAC Address, Assigned IP and Lease Time for each DHCP Client attached to the device (Figure 4-10).

  • Page 36: Wireless Settings

    TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide Figure 4-11 Wireless menu 4.6.1 Wireless Settings Selecting Wireless > Wireless Settings will enable you to configure the basic settings for your wireless network on the screen below (Figure 4-12).This page allows you to configure the wireless mode for your device.
  • Page 37 TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide 11bgn mixed - All 802.11b, 802.11g and 802.11n wireless stations can connect to the • device. Channel Width - Determines the channel width to be used. It is unnecessary to change the ...
  • Page 38 TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide Channel - Determines the operating frequency to be used. It is not necessary to change the  wireless channel unless you notice interference problems with another nearby access point. Mode - This field determines the wireless mode which the device works on.
  • Page 39 TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide Select the checkbox before Enable VLAN to enable VLAN function for this access point.  Configure the SSID and its corresponding VLAN ID. The detailed parameters are shown as  the above figure.
  • Page 40 TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide Multi-SSID+VLAN  Note: If the LAN port of AP is not connected to a switch but directly to a PC, 1. The PC can directly log on to the Web management page of AP and manage the access point.
  • Page 41 TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide Wireless Name of Root AP - If you select the radio button before Wireless Name of Root  AP, the AP client will connect to the AP according to SSID. Enter the SSID of AP that you want to access.
  • Page 42 TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide Channel Width - Determines the channel width to be used. It is unnecessary to change the  default value unless required. Enable Wireless Radio - Select or deselect this check box to allow or deny wireless stations ...
  • Page 43 TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide Click the Survey button to detect the SSIDs in the local area.  Note: To apply any settings you have altered on the page, please click the Save button, and then you will be reminded to reboot the device.

  • Page 44: Wireless Security

    TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide Mode - This field determines the wireless mode which the device works on.  11b only - Only 802.11b wireless stations can connect to the device. • 11g only - Only 802.11g wireless stations can connect to the device.
  • Page 45 TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide 1) Access Point Figure 4-18 Wireless Security - Access Point Disable Security - Check this box radio button to disable wireless security. If disabled, the  wireless stations will be able to connect this device without encryption. It is strongly recommended that you choose one of the security types to enable security.
  • Page 46 TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide Group Key Update Period - Specify the group key update interval in seconds. The value • can be either 0 or at least 30. Enter 0 to disable the update. WPA/WPA2-Enterprise - Select WPA/WPA2 based on Radius Server.
  • Page 47 TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide 2) Multi-SSID Figure 4-19 Wireless Security – Multi-SSID You can choose which SSID to configure wireless security settings for in the blank behind Operation Mode. Disable Security - Check this box radio button to disable wireless security. If disabled, the ...
  • Page 48 TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide Automatic - Select WPA or WPA2 automatically based on the wireless station's capability and request. WPA - Wi-Fi Protected Access. WPA2 - WPA version 2. Encryption - You can select either Automatic, TKIP or AES.
  • Page 49 TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide Automatic(Recommended) - Select WPA-Personal or WPA2-Personal automatically based on the wireless station's capability and request. WPA-PSK - Pre-shared key of WPA. WPA2-PSK - Pre-shared key of WPA2. Encryption - You can select either Automatic(Recommended), TKIP or AES.
  • Page 50 TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide 4) WDS Repeater Figure 4-21 Wireless Security – Repeater Disable Security - Check this box radio button to disable wireless security. If disabled, the  wireless stations will be able to connect this device without encryption. It is strongly recommended that you choose one of the security types to enable security.
  • Page 51 TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide Automatic - Select Shared Key or Open System authentication type automatically based on the wireless station's capability and request. Shared Key - Select 802.11 Shared Key authentication type. Open System - Select 802.11 Open System authentication.
  • Page 52 TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide 5) Universal Repeater Figure 4-22 Wireless Security – Repeater Disable Security - Check this box radio button to disable wireless security. If disabled, the  wireless stations will be able to connect this device without encryption. It is strongly recommended that you choose one of the security types to enable security.
  • Page 53 TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide Automatic - Select Shared Key or Open System authentication type automatically based on the wireless station's capability and request. Shared Key - Select 802.11 Shared Key authentication type. Open System - Select 802.11 Open System authentication.
  • Page 54 TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide 6) Bridge with AP Figure 4-23 Wireless Security – Bridge with AP Disable Security - Check this box radio button to disable wireless security. If disabled, the  wireless stations will be able to connect this device without encryption. It is strongly recommended that you choose one of the security types to enable security.
  • Page 55 TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide Group Key Update Period - Specify the group key update interval in seconds. The value • can be either 0 or at least 30. Enter 0 to disable the update. WPA/WPA2-Enterprise - Select WPA/WPA2 based on Radius Server.

  • Page 56: Wireless Mac Filtering

    TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide 4.6.3 Wireless MAC Filtering Selecting Wireless > Wireless MAC Filtering will allow you to set up some filtering rules to control wireless stations accessing the device, which depend on the station’s MAC address on the following screen as shown Figure 4-24.
  • Page 57 TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide Status - Select a status for this entry, either Enabled or Disabled.  To set up an entry, follow these instructions: First, you must decide whether the unspecified wireless stations can access the device or not. If...

  • Page 58: Wireless Advanced

    TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide  Note: If you enable the function and select the “Allow the stations specified by any enabled entries in the list to access” for Filtering Rules, and there are not any enabled entries in the list, thus, no wireless stations can access the device.

  • Page 59: Wireless Statistics

    TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide Enable AP Isolation - Isolates all connected wireless stations so that wireless stations  cannot access each other through WLAN. This function will be disabled if WDS/Bridge is enabled. 4.6.5 Wireless Statistics Selecting Wireless > Wireless Statistics will allow you to see the wireless transmission information in the following screen shown in Figure 4-27.

  • Page 60: System Tools

    TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide Figure 4-28 Throughput Monitor Rate - The Throughput unit.  Run Time - How long this function is running.  Transmit - Wireless transmit rate information.  Receive - Wireless receive rate information.

  • Page 61: Snmp

    TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide Figure 4-29 The System Tools menu 4.7.1 SNMP Selecting System Tools > SNMP to enable this function will allow the network management station to retrieve statistics and status from the SNMP agent in this device. Simple Network Management Protocol (SNMP) is a popular network monitoring and management protocol, used to refer to a collection of specifications for network management that include the protocol itself.
  • Page 62 TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide SysName - An administratively-assigned name for this managed node.  SysLocation - The physical location of this node.   Note: Specifying one of these values via the Device's Web-Based Utility makes the corresponding object read-only.

  • Page 63: Diagnostic

    TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide 4.7.2 Diagnostic Selecting System Tools > Diagnostic allow you to check the connections of your network components on the screen shown in Figure 4-31. Figure 4-31 Diagnostic Diagnostic Tools - Click the radio button to select one diagnostic tool Ping - This diagnostic tool troubleshoots connectivity, reachability, and name resolution •...
  • Page 64 TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide the Echo Reply message returned by the destination. However, some gateways do not return Time Exceeded messages for packets with expired TTL values and are invisible to the traceroute tool. In this case, a row of asterisks (*) is displayed for that hop.

  • Page 65: Ping Watch Dog

    Selecting System Tools > Firmware Upgrade allows you to upgrade the latest version of firmware for the device on the screen shown in Figure 4-34. Figure 4-34 Firmware Upgrade New firmware versions are posted at www.tp-link.com and can be downloaded for free. Firmware Version - Here displays the current firmware version. ...

  • Page 66: Factory Defaults

    TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide  Note: 1. There is no need to upgrade the firmware unless the new firmware has a new feature you want to use. However, when experiencing problems caused by the device itself, you can try to upgrade the firmware.

  • Page 67: Reboot

    TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide Figure 4-36 Save or Restore the Configuration Click Backup to save all configuration settings to your local computer as a file. To restore the device's configuration, follow these instructions: Click Browse… to find the configuration file which you want to restore.

  • Page 68: System Log

    TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide password of the device on the screen shown in Figure 4-38. Figure 4-38 Password It is strongly recommended that you change the factory default user name and password of the device. All users who try to access the device's web-based management page or Quick Setup will be prompted for the device's user name and password.
  • Page 69 TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide The device can keep logs of all traffic. You can query the logs to find what happened to the device. Log Type - By selecting the log type, only logs of this type will be shown.

  • Page 70: Appendix A: Application Example

    Settings. View the Wireless > Wireless Settings page and keep the SSID of the AP in mind. (Here we choose TP-LINK as the SSID for example.) You are suggested to change the SSID and secure your wireless network referring to 4.6.1 Wireless Settings...
  • Page 71 Enable to enable wireless network function. Right-click the wireless connection icon “ ” on the screen of the PC and then select View Available Wireless Networks. Highlight the SSID of the AP (Here is TP-LINK) and click Connect to add to the network.
  • Page 72 TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide Then the following page will display, which indicates you have been successfully added to the network wirelessly.

  • Page 73: Appendix B: Factory Defaults

    TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide Appendix B: Factory Defaults Item Default Value Common Default Settings Login Username admin Login Password admin IP Address 192.168.0.254 Subnet Mask 255.255.255.0 Wireless SSID TP-LINK_AP_XXXX Wireless Security Disable Wireless MAC Address Filtering Disable...

  • Page 74: Appendix C: Troubleshooting

    TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide Appendix C: Troubleshooting T1. How do I restore my Access Point’s configuration to its factory default settings? With the Access Point powered on, use a pin to press and hold the WPS/RESET button on the rear panel for more than 8 seconds before releasing it.

  • Page 75: Appendix D: Specifications

    100BASE-TX: UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) Wireless Frequency Band 2.4~2.4835GHz 11n： For TL-WA701ND: up to 150Mbps（Automatic） For TL-WA801ND: up to 300Mbps（Automatic） Radio Data Rate For TL-WA801ND: up to 450Mbps（Automatic） 11g：54/48/36/24/18/12/9/6M（Automatic） 11b：11/5.5/2/1M（Automatic） Frequency Expansion...
  • Page 76 TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide Working Humidity 10% ~ 90% RH, Non-condensing Storage Temperature -40℃~70℃(-40℉~158℉) Storage Humidity 5% ~ 90% RH, Non-condensing...

  • Page 77: Appendix E: Glossary

    TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide Appendix E: Glossary 802.11n - 802.11n builds upon previous 802.11 standards by adding MIMO (multiple-input multiple-output). MIMO uses multiple transmitter and receiver antennas to allow for increased data throughput via spatial multiplexing and increased range by exploiting the spatial diversity, perhaps through coding schemes like Alamouti coding.
  • Page 78 TL-WA701ND/TL-WA801ND/TL-WA901ND Wireless N Access Point User Guide key technologies behind WPA is the Temporal Key Integrity Protocol (TKIP). TKIP addresses the encryption weaknesses of WEP. Another key component of WPA is built-in authentication that WEP does not offer. With this feature, WPA provides roughly comparable security to VPN tunneling with WEP, with the benefit of easier administration and use.

This manual is also suitable for:

Tl-wa801ndTl-wa901nd

Table of Contents