Factory Defaults - TP-Link TL-WA7510N User Manual

TL-WA7510N
2. Enter or select the path name where you save the downloaded file on the computer into the
File Name blank.
3. Click the Upgrade button.
4. The Device will reboot while the upgrading has been finished.
Firmware Version - Displays the current firmware version.
Hardware Version - Displays the current hardware version. The hardware version of the
upgrade file must accord with the current hardware version.
Note:
The firmware version must correspond to the hardware. The upgrade process takes a few
moments and the Device restarts automatically when the upgrade is complete. It is important to
keep power applied during the entire process. Loss of power during the upgrade could damage
the Device.

5.17.4 Factory Defaults

Choose menu "System Tools > Factory Defaults", and you can restore the configurations of the
Device to factory defaults on the following screen.
Click the Restore button to reset all configuration settings to their default values.
Default User Name - admin.
Default Password - admin.
Default IP Address - 192.168.1.254.
Default Subnet Mask - 255.255.255.0.
Note:
All changed settings will be lost when defaults are restored.
5GHz 150Mbps Outdoor Wireless Access Point User Guide
Figure 5-83 Restore Factory Default
148