Password - TP-Link TL-WA7510N User Manual

TL-WA7510N
Click the Reboot button to reboot the Device.
Some settings of the Device will take effect only after rebooting, including:
Change the LAN IP Address (system will reboot automatically.).
Change the DHCP Settings.
Change the Wireless configurations.
Change the Web Management Port.
Upgrade the firmware of the Device (system will reboot automatically.).
Restore the Device's settings to the factory defaults (system will reboot automatically.).
Update the configuration with the file (system will reboot automatically.).

4.9.9 Password

Selecting System Tools > Password allows you to change the factory default user name and
password of the device on the screen shown in Figure 4-44.
It is strongly recommended that you change the factory default user name and password of the AP.
All users who try to access the AP's web-based utility will be prompted for the AP's user name and
password.
Note:
The new user name and password must not exceed 14 characters in length and must not include
any spaces. Enter the new Password twice to confirm it.
Click the Save button when finished.
Click the Clear All button to clear all.
5GHz 150Mbps Outdoor Wireless Access Point User Guide
Figure 4-44 Password
73