Dhcp - TP-Link TL-WA7510N User Manual

TL-WA7510N
MAC Address - the connected wireless station's MAC address.
Current Status - the connected wireless station's running status, one of STA-AUTH /
STA-ASSOC / STA-JOINED / WPA / WPA-PSK / WPA2 / WPA2-PSK / AP-UP / AP-DOWN /
Disconnected.
Received Packets - packets received by the station.
Sent Packets -packets sent by the station.
Belong To - the SSID that station belong to.
You cannot change any of the values on this page. To update this page and to show the current
connected wireless stations, click on the Refresh button.
If the numbers of connected wireless stations go beyond one page, click the Next button to go to
the next page and click the Previous button to return to the previous page.
Note:
This page will be refreshed automatically every 5 seconds.

5.8 DHCP

Figure 5-39 The DHCP menu
The DHCP (Dynamic Host Configuration Protocol) server function, which provides the TCP/IP
configuration for all the PCs that are connected to the device in the LAN, is Disable by default.
There are three submenus under the DHCP menu (shown in Figure 5-39), DHCP Settings, DHCP
Clients List and Address Reservation. Click any of them, and you will be able to configure the
corresponding function.
5GHz 150Mbps Outdoor Wireless Access Point User Guide
Figure 5-38 Wireless Statistics
112