TP-Link TL-WA7510N User Manual page 27

TL-WA7510N
Mode- This field determines the wireless mode which the AP works on.
Max Tx Rate - You can limit the maximum tx rate of the AP through this field.
You can select one of the following security options:
Disable Security- The wireless security function can be enabled or disabled. If disabled, the
wireless stations will be able to connect the AP without encryption. It is recommended
strongly that you choose one of the following options to enable security.
WPA-PSK/WPA2-PSK- Select WPA based on pre-shared passphrase.
PSK Password- You can enter ASCII or Hexadecimal characters.
For ASCII, the length should be between 8 and 63 characters.
For Hexadecimal, the length should be between 8 and 64 characters.
Please note that the key is case sensitive.
Not Change- If you chose this option, wireless security configuration will not change.
2) Multi-SSID – AP can support up to 4 SSIDs.
Wireless Radio- The wireless radio of the AP can be enabled or disabled to allow or deny
wireless stations to access. If enabled, the wireless stations will be able to access the AP;
otherwise, wireless stations will not be able to access the AP.
5GHz 150Mbps Outdoor Wireless Access Point User Guide
Figure 3-13
19