Ap Client Router Mode - TP-Link TL-WA7510N User Manual

TL-WA7510N

2.3.3 AP Client Router Mode

Figure 2-7 Hardware Installation of the TL-WA7510N in AP Client Router mode
1. Connect the LAN port of TL-WA7510N to the POE port of the Power Injector with an Ethernet
cable.
2. Connect the PC to the LAN port of the Power Injector with an Ethernet cable.
3. Plug one end of the Power Adapter into the DC jack on the Power Injector, and the other end
in electrical wall socket.
4. Power on the PC(s) and notebook(s).
5GHz 150Mbps Outdoor Wireless Access Point User Guide
10