Wireless Security - TP-Link TL-WA901N User Manual

Chapter 4
•
•
• Channel Width
the default value unless required.
• Enable Wireless Radio
stations to access the device.
• Enable SSID Broadcast
to broadcast its name (SSID) on the air. If it's allowed, when wireless clients survey the
local area for wireless networks to associate with, they will detect the SSID broadcast
by the device.
4. 4. 2.
1. Visit http://tplinkap.net, and log in using the password you created.
2. Go to
3. Configure the security settings of your wireless network and click Save. The security options
are different for different operation mode.
Access Point
• Disable Security
the wireless stations will be able to connect this device without encryption. It is
strongly recommended that you choose one of the security types to enable security.
• WPA/WPA2-Personal(Recommended) - Select WPA/WPA2 based on Radius Server.
Downloaded from ManualsNet.com
11bg mixed - Both 802.11b and 802.11g wireless stations can connect to the
device.
11bgn mixed - All 802.11b, 802.11g and 802.11n wireless stations can connect
to the device.
- Determines the channel width to be used. It is unnecessary to change
- Select or deselect this check box to allow or deny wireless
- Select or deselect this check box to allow or deny the device

Wireless Security

Wireless > Wireless Security.
- Check this box radio button to disable wireless security. If disabled,
search engine
Configure the Access Point
27