Dhcp Settings - TP-Link TL-WA7510N User Manual

TL-WA7510N
Figure 4-30 The DHCP menu

4.8.1 DHCP Settings

Selecting DHCP > DHCP Settings will enable you to set up the AP as a DHCP server, which
provides the TCP/IP configuration for all the PCs that are connected to the system on the LAN.
The DHCP Server is Disable by default, and can be configured on the page (shown as Figure 4-31):
DHCP Server - Enable or Disable the server. If you disable the Server, you must have
another DHCP server within your network or else you must configure the IP address of the
computer manually.
Start IP Address -This field specifies the first address in the IP Address pool. 192.168.1.100
is the default start IP address.
End IP Address - This field specifies the last address in the IP Address pool. 192.168.1.199
is the default end IP address.
Address Lease Time – It is the length of time a network user will be allowed to keep
connecting to the device with the current DHCP Address. Enter the amount of time (in
minutes), and then the DHCP address will be "leased". The time range is 1~2880 minutes.
The default value is 120 minutes.
Default Gateway - (Optional) Input the IP Address of the gateway.
Default Domain - (Optional) Input the domain name of your network.
Primary DNS - (Optional) Input the DNS IP address provided by your ISP or consult your
ISP.
5GHz 150Mbps Outdoor Wireless Access Point User Guide
Figure 4-31 DHCP Settings
62