TP-Link TL-WA7510N User Manual page 133

TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide
Figure 5-53 Advanced Security
Note:
FLOOD Filtering will take effect only when the Traffic Statistics in System Tools is enabled.
Packets Statistics interval (5~60) - The default value is 10. Select a value between 5 and 60
seconds in the pull-down list. The Packets Statistic interval value indicates the time section of
the packets statistic. The result of the statistic used for analysis by ICMP-Flood, UDP Flood
and TCP-SYN Flood.
DoS Protection - Enable or Disable the DoS protection function. Only when it is enabled, will
the flood filters be enabled.
Enable ICMP-FLOOD Attack Filtering - Enable or Disable the ICMP-FLOOD Attack
Filtering.
ICMP-FLOOD Packets Threshold (5~3600) - The default value is 50. Enter a value between
5 ~ 3600. When the current ICMP-FLOOD Packets number is beyond the set value, the
Device will start up the blocking function immediately.
Enable UDP-FLOOD Filtering - Enable or Disable the UDP-FLOOD Filtering.
UDP-FLOOD Packets Threshold (5~3600) - The default value is 500. Enter a value between
5 ~ 3600. When the current UPD-FLOOD Packets number is beyond the set value, the Device
will start up the blocking function immediately.
125