Alesis ANDROMEDA A6 Reference Manual page 190

Chapter 8: Pre Filter, Post Filter and Voice Mixes
turn up
instead of a notch.
- When using
filtering by pressing the
RING MOD Signal Routing
The signal routing of the Ring Modulator has a unique feature that allows you to
bypass the Filters while still routing the
This allows you to hear the filtered and unfiltered Ring Modulator simultaneously.
You can't do that with the other components of
• To hear the Ring Modulator in its purest form, turn all four knobs in
FILTER MIX
components going to the Filters.
In
POST FILTER MIX
module until the LED is off. (If the
those buttons to turn them off.) This connects the Ring Modulator's output to
the
PRE FILTER
the unfiltered Ring Modulator signal.
Try pressing the
of the Ring Modulator's signal, especially if the Filter Envelope is being used
to control the other signals.
• To hear this unfiltered Ring Modulator signal along with filtering, raise the
RING MOD
the previous page to route the
both of the Filters.
188
, effectively giving you a "
FILT 1 HP
as the input to
BP FILTER 2
BP INVERT
RING MOD
fully counter-clockwise. This turns off all of the
, press the
RING MOD
knob, bypassing the Filters. Use this knob to control the level of
button and assigning
MOD
control in the
PRE FILTER MIX
RING MOD
" input to
HIGHPASS
, you can invert the bandpass
button in the
POST FILTER MIX
signal as in the above examples.
.
PRE FILTER MIX
PRE FILTER MIX
button located near the bottom of this
or LEDs are lit, press
OSC 1 SINE OSC 2 SINE
to shape the loudness
ENV 1 (PITCH)
. Then follow one of the procedures on
signal, in parallel, through one or
A A6 R
NDROMEDA EFERENCE
FILTER 2
module.
PRE
M
ANUAL