Alesis ANDROMEDA A6 Reference Manual page 114

Chapter 5: Oscillators and Filters
Soft buttons
respective modulations. Soft buttons
buttons in the VCO sections and display their respective pages when pressed.
MOD 3
Soft button
button
Tip: When using any of these buttons—either the dedicated buttons on the front
panel or the soft buttons (mod tabs) under the display—pressing once displays
the function's page and a second press turns the function on (if it's presently off)
or turns it off (if it's currently on).
DISPLAY
PAGE PANEL LABEL
MOD1
—
MOD2
—
MOD3
—
—
—
—
MOD 1, 2 or 3
Button + LED
—
PWMOD
PWM
Button + LED
FMMOD
MOD
Button + LED
112
, however, are active and allow you to display their
through
3 7
6 PWMOD corresponds to the
corresponds to the
7 FMMOD
PARAMETER
DISPLAY
SOURCE
Any of the A6's
-100 ··· +100
LEVEL
OFFSET -100 ··· +100
ENABLE
See table on next
DEST
Mod Destination
Uses same parameters as above with the exception of
the selected VCO's Pulse Width as the only destination. See the following page
for more information on
Uses same parameters as above with the exception of
three destinations only. See the following page for more information on
, and correspond to the
3 4 5
buttons in the VCO sections and soft
PWM
button on the
MOD OSC 2 FM
OPTIONS
or RANGE DESCRIPTION
Use soft knob
79 modulation
possible modulation sources.
sources. See
Appendix B.
This parameter sets the amount of modulation
that will affect the selected destination using
soft knob
3
invert the action of the selected source. For
example, if Velocity is the source and a
negative value for
harder will reduce the level of the destination.
Using soft knob
offset for the selected modulation level.
OFF, ON This parameter is used to turn the selected
modulation on or off. Use soft knob
panel buttons on the right side of the
and sections.
OSC 2
Use soft knob
page.
possible modulation destinations. The
destinations are nine of the oscillator
parameters described earlier in this Chapter.
.
PWMOD
A
NDROMEDA
, and
MOD 1 MOD 2
knob on .
OSC 1
to scroll through the list of
1
. Keep in mind that negative values
LEVEL is used, playing
, this parameter sets the
4
to scroll through the list of
7
which is, of course,
DEST
which provides
DEST
A6 R M
EFERENCE ANUAL
or the
5
OSC 1
.
FMMOD