Alesis ANDROMEDA A6 Reference Manual page 169

EXAMPLE 3: BI-POLAR with Output LEVEL Clipping and RELEASE HOLD
Time
DELAY
ATTACK Time
Attack
SHAPE
D1TIME
Decay1
SHAPE
D2LEVL
D2TIME
Decay2
SHAPE
Level
SUSTAIN
R1TIME
Release1
SHAPE
R2LEVL
R2TIME
Release2
SHAPE
Envelope
OFFSET
Envelope
LEVEL
Envelope
POLAR
This example shows another relationship between the Offset and the envelope Level.
Since the envelope Level is set to
maximum Output Level is
top half of the Attack segment beyond the maximum Output Level. The envelope
levels are calculated beyond the maximum, but are clipped at the maximum.
The function for the Release stage is also shown here. When the
HOLD
to its maximum value, it is set to
reaches the Release2 Level, it holds at that Level infinitely until the Voice is released.
A A6 R
NDROMEDA EFERENCE
Chapter 6: Modulation and Envelopes
(no Delay stage)
OFF
8.67 S
LINEAR
7.58 S
LOG 1
Set to 0 but is effectively
3.70 S
LINEAR
Set to -59 but is effectively
2.92 S
EXPO 2
Set to but is effectively
-100
(Maximum, causing the
131.07 S
Can be set to anything but is ignored
+50
100
POSWAV
, the level from the start of the envelope to the
100
. After the Offset is adjusted to
100
mode. In this mode, when the envelope
HOLD
M
ANUAL
60 after adjusting for Offset
-9 after adjusting for Offset
after adjusting for Offset
-50
LED to light.)
HOLD
, this pushes the
+50
R2TIME
is set
167