Dual Effects: Mono - Alesis ANDROMEDA A6 Reference Manual

D E
UAL FFECTS
Parallel configurations consist of two discrete "side-by-side" mono-in/stereo-out
effects. These configurations are identified by the presence of a "+" in their name,
and by a
BLEND
of the Blend control is routed to one effect, while the right output is routed to the
other. The stereo outputs of both effects are then summed together to the outputs.
Effects that use this configuration:
Room+Hall
Plate+Hall
Room+Chorus
D E
UAL FFECTS
Dual Mono configurations consist of two discrete "side-by-side" mono-in/mono-out
effects. These configurations are identified by the presence of a ":" in their name, and
by separate left and right output controls, one for each effect. In each case, a
control allows you to set how much of each effect you want on each side. left input is
routed to one effect, while the right input is routed to the other. Unlike the parallel
effects, in these mono effects the left signal only feeds the left output, and the right
signal only feeds the right output.
independent control of the two effects.
Effects that use this configuration:
Chorus:Chorus
Delay:Delay
A A6 R
NDROMEDA EFERENCE
: P
ARALLEL
control between the input and the effect. In each case, the left output
BLEND
: M
ONO
Chorus:Chorus
PAN
M
ANUAL
Chapter 10: Using Effects
Room+Plate
Room+Delay
Room+Flange
PAN
and have
Delay:Delay
213