Chapter 5: Oscillators and Filters
Since there is only one front panel knob for
the selection of which oscillators were affected by turning the
This way you can have one oscillator set to a constant value while the other would be
controlled by the
both oscillators. The soft knobs control the
settings. The
LIVE
Once you have selected which VCO(s) to modulate by
controls on the upper right-hand area of the front panel to adjust the characteristics
of this envelope as it affects the frequency of
envelope operation are provided in Chapter 6.
108
knob. Or you can have the
ENV1 AMOUNT
setting is only for the
LIVE
control, the
parameter allows
LIVE
ENV 1
ENV1 AMOUNT
ENV1 AMOUNT
settings regardless of the
ENV1 AMOUNT
knob on the front panel.
ENV1 AMOUNT
, use the
ENV 1
or both VCOs. The basics of
OSC 1, OSC 2
A
A6 R
NDROMEDA
EFERENCE
knob.
knob control
ENV 1 (PITCH)
M
ANUAL