Alesis ANDROMEDA A6 Reference Manual page 79

PAGE PARAMETER
Continued
PROGRS Parameters
The Progressor allows for automatic transposing of the sequence within the limits set
by the and
screen, you should set the
Using as the base note (the key that's being played) value, the
end of the note range where transposing takes place. Conversely,
limit of the note range where transposing takes place. Although both of these
parameters have a
octaves (
The
sequence will transpose up one semitone starting at the
repetition of the sequence until the
means that the sequence will start playing at the
semitone with each repetition until the
A A6 R
NDROMEDA EFERENCE
OPTIONS
or RANGE
,
,
parameters. Although the
and
to range, the most useful limits will be within a few
to settings).
value determines the transpose amount. A setting of
M
ANUAL
Chapter 2: Playing the A6
DESCRIPTION
Turns re-triggering on or off. When off, the
trig source acts as a one-shot trigger. When
on, the trigger acts repeatedly, restarting the
sequence from the beginning.
Turns the trigger on or off.
Determines which voice triggers the
sequencer.
The first voice to play will trigger the
sequencer.
The oldest voice playing will trigger the
sequencer.
The newest voice playing will trigger the
sequencer.
This parameter determines how voices are
played once a trigger or multiple triggers
occur.
One trigger plays the sequence according to
the page settings.
Requires multiple triggers: each Step ("stage")
in the sequence plays in order if each new
trigger has a different level.
Requires multiple triggers: each Step plays in
order with each new trigger.
Requires multiple triggers: each Step plays at
random with each new trigger.
is the first parameter on the
limits first, then adjust the
note with each
note limit is reached. A
key and transpose down one
note limit is reached.
value.
value sets the low
sets the upper
means that the
setting of
77