Alesis ANDROMEDA A6 Reference Manual page 80

Chapter 2: Playing the A6
SYNC Parameters
PAGE PARAMETER
Sync Source
Size of
Sequencer Steps
About Tempos and STPSIZ
The page features a tempo display that can help you match the speed of the
clock to musical values. This display calculator assumes that 24 ticks equals a
quarter note, and that the music is in 4/4 time. If
is set to
and each step of the sequencer will last a quarter note. If you want the sequencer to
play twice as fast, set
If you want odd step values, use the increment and decrement buttons to adjust the
length by one tick increments.
MOD Parameters
The modulation page for the sequencer is identical to the
Clock. See page 71.
78
OPTIONS
DESCRIPTION
or RANGE
Allows you to select the clock source that will
drive the sequencer.
Uses the sequencer's dedicated clock for its
tempo.
Uses the A6's global Clock for tempo.
Uses an external MIDI device for tempo.
··· Allows you to designate the size of each
sequencer step. The default is a quarter note or
clock ticks. Using the soft pot to adjust this
parameter gives you the most commonly used
values. The increment and decrement buttons
allow finer adjustment for odd values.
Note that in Mix Mode, each mix channel's step
size setting will override the program's step size
setting. This allows you to have a different step
size setting for a program in Mix Mode than in
Program Mode.
, the display will read:
to and the display will read
is set to
page for the
SYNC/MOD
A A6 R
NDROMEDA EFERENCE
, and
.
M
ANUAL