Alesis ANDROMEDA A6 Reference Manual page 130

Chapter 5: Oscillators and Filters
Main FILTER Parameters
DISPLAY
PAGE PANEL LABEL
FILT 1
FILTER 1 (12dB)
or
FILT 2
FILTER 2 (24dB)
FREQ
RESONANCE
FILT 2
F2 INPUT
(only)
128
PARAMETER OPTIONS
DISPLAY RANGE DESCRIPTION
0.0218 ···
FREQ
22.3482 (Fil 1)
Frequency
44.6960 (Fil 2)
RES 0 ··· 100.00
INPUT Available on
the input (the audio source) of
Band Pass
or
This parameter is used to set the frequency
of the selected filter (in kilohertz).
This parameter is used to set the amount of
resonance of the selected filter.
only, this parameter allows you to select
FILTER 2
FILTER 2
OFF receives no input (but it can
FILTER 2
generate tones on its own when in full
resonance).
MIX When this is selected, the output of
is fed into
FILTER MIX
selected as the input, the A6's filters
operate in parallel. This means that both
filters are filtering the sound independently
at the same time. Use the level knobs in
POST FILTER MIX
from both filters.
To filter the A6's audio by
simply turn off
FILTER 2
knob fully counter-clockwise.
LP
To filter the A6's audio by
simply turn off
FILTER 1
, and
LP FILT1 HP
counter-clockwise.
NOTCH When selected,
FILTER 2
of 's notch filter(Low Pass and High
FILTER 1
Pass, post-fader). The output of
and
PASS FILTER 1 HIGH PASS
disconnected from feeding the VCA
directly—their knobs feed only Filter 2.
BP When selected,
FILTER 2
of 's band pass filter.
FILTER 1
A A6 R
NDROMEDA
:
PRE
. When MIX
FILTER 2
to "mix" the levels coming
only,
FILTER 1
by turning the
FILT2
only,
FILTER 2
by turning the
FILT1
knobs fully
FILT1 BP
will filter the output
FILTER 1 LOW
will be
will filter the output
M
EFERENCE ANUAL
is