Alesis ANDROMEDA A6 Reference Manual page 44

Chapter 2: Playing the A6
CNTL Page Parameters
The abbreviation for "Controllers", this page permits you to enable/disable local and
MIDI controllers for the selected Mix Channel.
The parameters on this page determine whether or not the displayed controllers
affect the currently selected Mix Channel. Use the parameter's corresponding soft
knob to turn the function on or off.
PAGE PARAMETER
Page 1
The parameter group contains 16 parameters, displayed eight at a time. Press soft button
to toggle between the two display sub-pages.
7
Page 2
SOLO function
This is not a "page", actually; you can press Soft Button 8 to solo a Mix Channel
when you're on any of the pages of Mix mode. This "solos" the currently selected
Mix Channel (indicated by the green blinking LED over the SELECT button) so you
can concentrate on one layer of a Mix without hearing the others.
42
OPTIONS
or RANGE DESCRIPTION
Enables, disables the A6's Pitch Wheel.
,
Enables, disables the A6's Modulation Wheel.
,
Enables, disables keyboard Aftertouch. MIDI In
,
aftertouch is turned off or on in Page 2, below.
Enables, disables the rear panel
,
MIDI In sustain pedal control.
Enables, disables the rear panel
,
Enables, disables the rear panel
,
Enables, disables the A6's Ribbon Controller.
,
Enables, disables the A6's keyboard.
,
Enables, disables MIDI In control of the current
,
Mix Channel.
Enables, disables MIDI Out control from the
,
current Mix Channel.
Enables, disables MIDI continuous controller
,
commands such as sliders and knobs on another
MIDI device.
Enables, disables MIDI volume control.
,
Enables, disables MIDI program change
,
commands.
Enables, disables MIDI Aftertouch.
,
A
NDROMEDA
jack and
SUSTAIN
jack.
SWITCH
jack.
CC PEDAL
A6 R M
EFERENCE ANUAL