Clock Parameters - Alesis ANDROMEDA A6 Reference Manual

Chapter 2: Playing the A6
C P
LOCK ARAMETERS
DISPLAY
PAGE PANEL LABEL
TEMPO
Knob
70
PARAMETER OPTIONS
or RANGE DESCRIPTION
DISPLAY
Beats Per Minute
Clock Start Mode
Tempo
Modulation by
Voice
Mod Mix Channel
Sync Source
The knob adjusts the tempo of the Clock from
···
.46 bpm to 500 bpm.
This parameter determines how the clock is
started.
The clock will be free-running.
The clock will re-start whenever a non-legato
key is pressed, in other words, upon the first
key-down.
This parameter is used to select the amount of
modulation triggered by a voice. Use the soft
knob below this parameter in the display to
select one of three options, described below.
The first voice to modulate the clock will
determine the modulation source amount. If
this first voice is released while other voices
are held, the last modulation source for the
first voice is held and used.
The oldest voice playing this sequence will
determine the modulation source amount.
The newest voice playing this sequence will
determine the modulation source amount.
In Mix Mode, this parameter determines
which Mix Channel will modulate the Clock.
Selects the source from which the Clock's
tempo is generated. Note That this is a Global
Parameter, so it keeps its value even after
changing Programs or Mixes.
The A6's internal dedicated clock
Incoming MIDI clock from an external MIDI
Master
Selects whether MIDI Clock is sent out the
,
MIDI port. This is a Global Parameter, so it
keeps its setting even after changing Programs
or Mixes. (Note that MIDI Clock is different
from MIDI Song Position Pointer).
A A6 R
NDROMEDA
M
EFERENCE ANUAL