SHAPE: Selecting the Stage Slope
Each time parameter of an envelope (except Delay) has a user-selectable property
called slope. This term refers to how the attack, decay and release stages accelerate
(speed up) or decelerate (slow down) as each stage approaches its target level.
When a time stage parameter is selected, its current slope appears in the far right side
of the display. Use Soft Knob
• A
LINEAR
as the stage progresses towards its target level. In the illustration above, notice
that the linear slope is depicted as a straight line (from where we get the term
"linear"). The stage doesn't speed up or slow down in its duration but keeps
an even rate of change.
A
A6 R
NDROMEDA
EFERENCE
Chapter 6: Modulation and Envelopes
to make your selection:
7
slope means that the time settings do not accelerate (or decelerate)
M
ANUAL
139