Alesis ANDROMEDA A6 Reference Manual page 161

DISPLAY
PAGE PANEL LABEL
DYN
Continued
—
—
—
—
Key Tracking and RELMOD Release 2 Modulation
The TIME
page) by the Note Number that triggered the envelope. If you refer back to
TIME
page 54 when we covered Keyboard Properties, each key of the A6's keyboard as
well as any received MIDI Note is assigned a number. This number is used by the A6
to determine what musical note or notes to play.
The
KEYTRK
stage times. The
discussion, let's use Middle C (C5) as the
At Middle C, the selected envelope's stages are not affected and will proceed
according to the times as set in the
selected as the
A A6 R
NDROMEDA
PARAMETER
DISPLAY
KEYTRK
-100 ··· +100
Key Tracking
KTBASE
Key Tracking
Base Note
-100 ··· +100
LVLTRK
Level Tracking
-100 ··· +100
VELMOD
Level Velocity
Modulation
-100 ··· +100
RELMOD
Release 2
Modulation
and RELMOD parameters modulate the stage time settings (as set in the
Key Tracking setting affects Decay 1, Decay 2, Release 1 and Release 2
RELMOD Release 2 Mod setting affects Release 2 only. For our
) as the "neutral note".
KTBASE
M
EFERENCE ANUAL
Chapter 6: Modulation and Envelopes
OPTIONS
or RANGE DESCRIPTION
Key Tracking allows you to dynamically alter
the time settings of the selected envelope's
stages (except Delay and Attack) by the Note
Number that triggered this envelope.
When positive settings are used, the high
notes add time to D1, D2, R1 and R2 time
settings, making the envelope take longer to
complete. Low notes subtract from these time
settings. The note that determines the mid-
point is the
C0 ··· G10 This parameter sets the midpoint between the
range of notes where adding time to the
envelope and subtracting time occurs.
This parameter spans the entire range of MIDI
notes from C0 to G10.
This parameter allows you to dynamically
alter the
LEVEL
level – of the selected envelope by the Note
Number that triggered this envelope.
A setting of
This parameter allows you to dynamically
alter the
LEVEL
level – of the selected envelope by the Velocity
of the key that triggered this envelope.
A setting of
This parameter allows you to dynamically
alter the Release2
envelope by the Note Number that triggered
this envelope. See examples below.
note.
KTBASE
TIME page. Consider Middle C (or any other note
parameter, next.
KTBASE
setting – the overall output
means no modulation.
0%
setting – the overall output
means no modulation.
0%
setting of the selected
TIME
159