Configuring Network Profiles; Network Profile Settings - Cisco 7921G - Unified Wireless IP Phone VoIP Administration Manual

Configuring Network Profiles

Configuring Network Profiles
You can configure up to four profiles for a phone to take advantage of WLAN environments. You can
add names to the profiles and enable one or more of the profiles for the phone to use. The Network
Profiles section on the web page displays the following information about each phone:
•
•
•
•
To display the Network Profiles list, access the web page for the phone as described in the
the Configuration Web Page for a Phone" section on page
For more information about configuring network profiles, see these sections:
•
•
•
•
•
•
•

Network Profile Settings

You can configure the settings for a profile by using this web page. You can also modify or view
configured profiles by clicking on the profile.
for more information.
Table 4-2
Item
Wireless
Profile Name
SSID
Call Power Save Mode Automatically detects the type of power saving
Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified Communications Manager Release 7.0
4-8
Profile—Displays a list of four profiles.
Name—Lists the name for the profile.
SSID—Lists the SSID used by the profile.
Status—Indicates which profiles are active or inactive.
Network Profile Settings, page 4-8
Using Network Profile Templates, page 4-37
Configuring Wireless Settings in a Network Profile, page 4-13
Configuring Wireless LAN Security, page 4-14
Configuring IP Network Settings, page 4-25
Configuring the Alternate TFTP Server, page 4-26
Configuring Advanced Network Profile Settings, page 4-27
Network Profile Settings Items
Description
Provides a name for the profile to make it easy
to identify; up to 63 alphanumeric characters.
Assigns the Service Set Identifier (SSID) to
this profile. You must assign the same SSID to
the phone that is also assigned to access points
in the wireless network.
mode that active and idle phones require. The
phone can use U-APSD or PS-Poll when it is
idle. When the phone is in an active call, the
power save mode is controlled by Call Power
Save Mode.
Chapter 4 Using the Cisco Unified Wireless IP Phone 7921G Web Pages
4-5, and then click NETWORK PROFILES .
Table 4-2 describes the settings and provides references
"Accessing
For More Information, See...
Configuring Wireless
Settings in a Network
Profile, page 4-13
Associating to an AP,
page 2-10
802.11 Standards for WLAN
Communications, page 2-3
OL-15985-01