Overview Of Configuring And Installing The Cisco Unified Wireless Ip Phone 7921G - Cisco 7921G - Unified Wireless IP Phone VoIP Administration Manual

Overview of Configuring and Installing the Cisco Unified Wireless IP Phone 7921G

To add wireless IP phones to the IP network, system administrators also must perform a site survey to
determine where to place and install access points (APs) for wireless voice coverage. For detailed
information about a voice over WLAN deployment, refer to the
Guide.
After you have set up the IP telephony system and configured system-wide features in Cisco Unified
Communications Manager, you can add IP phones to the system.
The following topics provide an overview of procedures for adding Cisco Unified IP Phones to your
network:
•
•
Configuring the Cisco Unified Wireless IP Phone 7921G in Cisco Unified
Communications Manager
To add phones to the Cisco Unified Communications Manager database, you can use:
•
•
•
•
For more information about these choices, see the
Unified Communications Manager" section on page
For general information about configuring phones in Cisco Unified Communications Manager, refer to
the "Cisco Unified IP Phone" chapter in the Cisco Unified Communications Manager System Guide.
For a checklist of tasks for configuring the phone in Cisco Unified Communications Manager, see the
"Configuring the Cisco Unified Wireless IP Phone 7921G in Cisco Unified Communications Manager"
section on page
Related Topics
•
•
•
Installing the Cisco Unified Wireless IP Phone 7921G
After you have added the phones to the Cisco Unified Communications Manager database, you can
complete the phone installation. You (or the phone users) can install the phone at the users's location.
The Cisco Unified Wireless IP Phone Installation Guide that ships in the box with each phone provides
directions for assembling the phone and accessories and charging the battery.
Prior to using the phone to connect to the wireless LAN, you need to configure a network profile for the
phone. You can use the Cisco Unified Wireless IP Phone 7921G web pages to set up the network profile
and other phone settings, or you can configure the network profile using phone menus.
Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified Communications Manager Release 7.0
1-12
Configuring the Cisco Unified Wireless IP Phone 7921G in Cisco Unified Communications
Manager, page 1-12
Installing the Cisco Unified Wireless IP Phone 7921G, page 1-12
Auto-registration
Cisco Unified Communications Manager Administration
Bulk Administration Tool (BAT)
BAT and the Tool for Auto-Registered Phones Support (TAPS)
D-4.
Installing the Cisco Unified Wireless IP Phone 7921G, page 1-12
Configuring Features, Templates, Services, and Users, page 7-1
Configuring the Cisco Unified Wireless IP Phone 7921G in Cisco Unified Communications
Manager, page D-4
Chapter 1 Overview of the Cisco Unified Wireless IP Phone 7921G
Cisco Enterprise Mobility 3.0 Design
"Methods for Adding Phones to Cisco
3-2.
OL-15985-01