Defining Custom Names And Custom Values On The Phone; Defining Custom Parameters From The Phone Web Page - Cisco 7921G - Unified Wireless IP Phone VoIP Administration Manual

Setting Up and Using the Phone Configuration Utility
•

Defining Custom Names and Custom Values on the Phone

To define the CustomName and CustomValue fields from the phone, follow these steps:
Procedure
On the main phone screen, choose SETTINGS > System Configuration > Wavelink.
Step 1
Press **# to unlock the phone.
Step 2
Scroll to a CustomName, enter an attribute name (for example, "User"), and click Save.
Step 3
Note
Scroll to CustomValue and enter a value for the corresponding CustomName (for example, "Admin"),
Step 4
and click Save.
You can define up to four pairs of custom parameters.

Defining Custom Parameters from the Phone Web Page

To define customer parameters from the phone web page, follow these steps:
Procedure
From the phone web page, choose Wavelink Settings.
Step 1
In the Wavelink Custom Parameters section, enter values in the Name and Value fields. You can define
Step 2
up to four pairs of custom parameters.
Note
Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified Communications Manager Release 7.0
6-4
If you assign attributes from the phone or phone web page, you define values for the CustomName
and CustomValue fields:
– Defining Custom Names and Custom Values on the Phone, page 6-4
Defining Custom Parameters from the Phone Web Page, page 6-4
–
Only alphanumeric characters are allowed in the CustomName field.
Do not use spaces in the Name field.
Chapter 6 Configuring the Phone Using the Wavelink Avalanche Server
OL-15985-01