Installing And Using The Desktop Charger - Cisco 7921G - Unified Wireless IP Phone VoIP Administration Manual

Chapter 3 Setting Up the Cisco Unified Wireless IP Phone 7921G
Installing the Cisco Unified Wireless IP Phone 7921G
While the battery is charging, the indicator light is red.
When the battery is fully charged, the indicator light turns green. You can disconnect the USB cable
Step 7
from the phone, and unplug the cable from the PC.

Installing and Using the Desktop Charger

The desktop charger can charge both the phone battery installed in the phone and a spare battery at the
same time.You can place the phone in the desktop charger to use the speakerphone capability while
charging the phone and battery. For information about using the desktop charger speakerphone, refer to
the "Using a Handset, Headset, and Speakerphone" in the Cisco Unified Wireless IP 7921G Phone
Guide.
To identify the desktop charger components and how to set up the desktop charger, use Figure 3-5.
Figure 3-5 Desktop Charger Assembly and Components
Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified Communications Manager Release 7.0
3-13
OL-15985-01