Product-Specific Configuration Options For The Cisco Unified Wireless Ip Phone 7921G - Cisco 7921G - Unified Wireless IP Phone VoIP Administration Manual

Product-Specific Configuration Options for the Cisco Unified Wireless IP Phone 7921G

Related Topics
•
•
•
•
•
Product-Specific Configuration Options for the Cisco Unified
Wireless IP Phone 7921G
Each Cisco Unified IP Phone has product-specific configuration options in Cisco Unified
Communications Manager Administration that are available by phone model. The following
product-specific configuration options are available for the Cisco Unified Wireless IP Phone 7921G:
•
•
•
•
•
•
•
When setting the Administration Password in the Product Specific Configuration section in Cisco
Caution
Unified Communications Manager Administration 5.0 or later, you must enable TFTP encryption.
Otherwise, the password appears in readable text in the phone configuration file and can be viewed from
any host that has access to TFTP server.
•
•
Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified Communications Manager Release 7.0
7-14
Configuring Softkey Templates, page 7-16
Setting Up Services, page 7-18
Configuring Corporate and Personal Directories, page 7-19
Adding Users to Cisco Unified Communications Manager Administration, page 7-20
Creating Custom Phone Rings, page 7-22
Disable Speakerphone—Turns off the speakerphone capability of the handset. Options are False or
True.
Gratuitous ARP—Enables or disables the ability for the phone to learn MAC addresses from
Gratuitous ARP. This capability is required to monitor or record voice streams. Options are Enabled
or Disabled.
Settings Access—Enables, disables, or restricts access to local configuration settings in the Settings
menus. With restricted access, only the Phone Settings menu is accessible. With disabled access, no
options appear when you access the Settings menu on the phone. Options are Enabled, Disabled, and
Restricted.
Web Access—Determines the level of access to the web pages for the phone. Provides Disabled,
Read only, and Full access to a phone's web pages through a web browser. Options are Read Only,
Full, Disabled.
Profile 1-4—Locks or unlocks the network profiles. If locked, the phone user cannot modify the
network profile. Options are Unlocked and Locked.
Load Server—Identifies the alternate server that the phone will use to obtain firmware loads and
upgrades. Enter an IP address or host name for the server.
Admin Password (Cisco Unified Communications Manager 5.0 and later)—Password to access the
configuration web pages for the phone. Default password is "CiscoCisco." Password must be 8-32
characters.
Special Numbers—Identifies special phone numbers that do not require unlocking the keypad to
call, such as 911 or an emergency number. Enter numbers up to 16 digits in length.
Application URL—Specifies the URL that the phone contacts application services. The maximum
length is 256 characters.
Chapter 7 Configuring Features, Templates, Services, and Users
OL-15985-01