Configuring Telephony Features; Configuring Network Parameters Using The Cisco Unified Ip Phone - Cisco 7906G Administration Manual

Chapter 1 An Overview of the Cisco Unified IP Phone

Configuring Telephony Features

Configuring Network Parameters Using the Cisco Unified IP
Phone
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager
OL-10008-01
You can modify certain settings for the Cisco Unified IP Phone from the
Cisco Unified CallManager Administration application. Use this web-based
application to set up phone registration criteria and calling search spaces, to
configure corporate directories and services, and to modify phone button
templates, among other tasks. See the
Phone" section on page 5-2
Guide for additional information.
For more information about the Cisco Unified CallManager Administration
application, refer to Cisco Unified CallManager documentation, including
Cisco Unified CallManager System Guide. You can also use the context-sensitive
help available within the application for guidance.
You can access the complete Cisco Unified CallManager documentation suite at
this location:
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/index.htm
Related Topic
• Telephony Features Available for the Phone, page 5-2
You can configure parameters such as DHCP, TFTP, and IP settings on the phone
itself. You can also obtain statistics about a call or firmware versions on the
phone.
For more information about configuring features and viewing statistics from the
phone, see Chapter 4, "Configuring Settings on the Cisco Unified IP Phone,"
see Chapter 7, "Viewing Security Information, Model Information, Status, and
Statistics on the Cisco Unified IP Phone."
"Telephony Features Available for the
and Cisco Unified CallManager Administration
What Features are Supported?
1-9
and