Cisco 7921G - Unified Wireless IP Phone VoIP Administration Manual page 125

Chapter 5 Configuring Settings on the Cisco Unified Wireless IP Phone
To access the Phone Settings menu options on a Cisco Unified Wireless IP Phone 7921G, follow these
steps:
Procedure
Step 1 Choose SETTINGS > Phone Settings.
Step 2 Press the number for the setting that you want to configure (or you can scroll to the setting and press the
Select button).
Step 3 Press the number for the setting category.
Press the number for the setting that you want to change.
Step 4
For descriptions of the settings, see
"Using Phone Settings," in the Cisco Unified Wireless IP Phone 7921G Guide.
Table 5-4
Phone Setting
Sound Settings
Ring Tone
Volumes
Ring
Speaker
Handset
Headset
Docking Speaker
Docking Ring
Alert Pattern
Ring Output
Display Settings
Display Brightness
Display Timeout
LED Coverage Indicator
Keypad Settings
Any Key Answer
Keypad Auto Lock
Keypad Tone
Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified Communications Manager Release 7.0
OL-15985-01
Table 5-4. For specific instructions to change these settings, refer to
Configurable Settings for the Phone Sounds, Display, and Keypad
Description
Assigns the ring tone for each line on the phone.
Sets the ring volume level for the phone.
Sets the volume for the speaker.
Sets the volume for the handset.
Sets the volume for the headset.
Sets the volume for the desktop charger speakerphone.
Sets the ring volume level for the desktop charger.
Sets the ring, vibrate, or combination to alert the user of an incoming
call.
Sets the phone to ring through speaker, headset, or both speaker and
headset.
Sets the brightness for the phone screen.
Sets the length of time for the phone screen to display before turning
off or disables the timer so screen always displays.
Enables or disables the LED blink to indicate that the phone is in
service and within the coverage area.
Enables or disables using any key or button on the phone to answer a
ringing call.
Sets the length of time for the keypad to lock automatically after no
keypad activity or disables auto lock.
Enables or disables tones for keypad presses.
Changing Phone Settings
5-11