Configuring Network Parameters Manually - Cisco 7940G Administration Manual

Configuring the SIP Parameters Manually
See the
Select Settings > Network Configuration.
Step 2
The Network Configuration menu appears.
To restore all parameters to their defaults, select Erase Config > Yes.
Step 3
Note
Select Save.
Step 4
The phone programs the new information into flash memory and resets.

Configuring Network Parameters Manually

If you are not using DHCP to configure your network parameters, you must manually configure them.
Prerequisites
1.
2.
3.
4.
For a complete list of the SIP parameters that you can configure, see
Parameters."
To manually configure your phone's network parameters, follow these steps:
Procedure
Press the Settings key.
Step 1
The Settings menu is displayed.
Highlight Network Configuration.
Step 2
Press the Select softkey.
Step 3
The Network Configuration menu is displayed.
Step 4 Highlight DHCP Enabled.
Step 5 Press the No softkey.
DHCP is now disabled.
Cisco Unified IP Phone 7960G and 7940G Administration Guide for Release 8.0 (SIP)
3-14
"Unlocking the Phone" section on page
If DHCP is disabled on a phone, restoring default phone settings reenables DHCP.
Connect your phone as described inthe
Unlock configuration mode as described in the
default, the network parameters are locked to ensure that end users cannot modify settings that might
affect their network connectivity.
Review the guidelines on using the Cisco SIP IP phone menus.
If configuring a domain name:
Press the Number softkey to enter a numerical ID or press the Alpha softkey to enter a name.
a.
If entering letters, use the numbers on the dial pad associated with a particular letter. For
b.
example, the 2 key has the letters A, B, and C. For a lowercase a, press the 2 key once. To scroll
through the available letters and numbers, press the key repeatedly.
Press the << softkey to delete any mistakes.
c.
Chapter 3
3-10.
"Installing the Phone on the Wall" section on page
"Unlocking the Phone" section on page
Appendix D, "SIP IP Phone
Initializing Cisco Unified IP Phones
2-1.
3-10. By
OL-7890-01