Cisco 7921G - Unified Wireless IP Phone VoIP Administration Manual page 147

Chapter 7 Configuring Features, Templates, Services, and Users
Table 7-1 Telephony Features for the Cisco Unified Wireless IP Phone 7921G (continued)
Feature Description
Direct transfer Allows a user to connect two calls to each other (without
remaining on the line).
Directed Call Park Allows a user to transfer an active call to an available
directed call park number that the user dials or speed dials.
After pressing Transfer, the user dials the directed call park
number to store the call.
Call Park BLF speed dial enables access to the directed call
park number and indicates that the directed call park
number is available or unavailable.
Note
Directed Call Allows a user to pick up an alerting call from a specific DN
Pickup by pressing the group pickup softkey followed by the DN
where the call is ringing.
Do Not Disturb When DND is turned on, no audible rings occur during the
(DND) ringing-in state of a call or no audible or visual
notifications of any type occur.
You can configure the phone to have a softkey template
with a DND softkey or a phone-button template.
Note
The following DND parameters are configurable in
Cisco Unified Communications Manager Administration:
DND—This checkbox allows you to enable DND on a
•
per-phone basis. Use Cisco Unified Communications
Manager Administration > Device > Phone > Phone
Configuration.
DND Option—Choose "Call Reject" (to turn off all
•
audible and visual notifications), or "Ringer Off" (to
turn off only the ringer). DND Option appears on both
the Common Phone Profile window and the Phone
Configuration window (Phone Configuration window
value takes precedence).
DND Incoming Call Alert—Choose the type of alert to
•
play, if any, on a phone for incoming calls when DND
is active. This parameter is located on both the
Common Phone Profile window and the Phone
Configuration window (Phone Configuration window
value takes precedence).
BLF Status Depicts DND—Enables DND status to
•
override busy/idle state.
Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified Communications Manager Release 7.0
OL-15985-01
If you implement Directed Call Park, avoid
configuring the Park softkey. This prevents users
from confusing the two Call Park features.
DND is available in Cisco Unified
Communications Manager 6.0(1), 6.1(1), or 7.0(1)
only.
Telephony Features Available for the Phone
Configuration Reference
For more information, refer to Cisco
Unified Communications Manager System
Guide, "Cisco Unified IP Phones" chapter.
For more information refer to:
Cisco Unified Communications
•
Manager Features and Services
Guide, "Call Park and Directed Call
Park" chapter.
Modifying Phone Button Templates,
•
page 7-17
For more information refer to Cisco
Unified Communications Manager
Features and Services Guide.
For more information, refer to:
Cisco Unified CallManager Features
•
and Services Guide, "Do Not Disturb"
chapter.
Cisco Unified Communications
•
Manager Administration Guide.
7-7