Configuring Wireless Lan Settings; Cisco Unified Wireless Ip Phone 7921G Web Pages; Network Profile Menu On The Cisco Unified Wireless Ip Phone 7921G; Using A Headset - Cisco 7921G - Unified Wireless IP Phone VoIP Administration Manual

For cisco unified communications manager 7.0
Hide thumbs Also See for 7921G - Unified Wireless IP Phone VoIP:
Table of Contents

Advertisement

Chapter 3
Setting Up the Cisco Unified Wireless IP Phone 7921G
Related Topics

Configuring Wireless LAN Settings

Before the phone can connect to the WLAN, you must configure the network profile for the phone with
the WLAN settings. You can use two methods for setting up the network profiles:

Cisco Unified Wireless IP Phone 7921G Web Pages

You can access the Cisco Unified Wireless IP Phone 7921G web pages to set up the WLAN settings in
the network profile. For a new phone with the factory default settings, you must use the USB cable to
connect the phone to your PC. For more information and instructions, see
Unified Wireless IP Phone 7921G Web Pages."

Network Profile Menu on the Cisco Unified Wireless IP Phone 7921G

You can use the SETTINGS menu on the phone and access the Network Profiles menu to set up the
network configuration and the WLAN configuration. For more information and instructions, see
Chapter 5, "Configuring Settings on the Cisco Unified Wireless IP Phone."

Using a Headset

Although Cisco performs some internal testing of third-party headsets for use with the Cisco Unified IP
Phones, Cisco does not certify or support products from headset or handset vendors. Because of the
inherent environmental and hardware inconsistencies in the deployment locations, there is not a single
"best" solution that is optimal for all environments. Cisco recommends that customers test the headsets
in the areas where the headsets work the best before deploying a large number of units in the network.
Cisco recommends the use of good quality external devices, like headsets that are screened against
unwanted radio frequency (RF) and audio frequency (AF) signals. Depending on the quality of these
devices and the proximity to other devices, such as cell phones, two-way radios, electric lights, and
electric motors, some audio noise or "hum" can still occur. Large PC monitors can also cause humming
or buzzing sounds. See the
See the
information.

Audio Quality Subjective to the User

Beyond the physical, mechanical and technical performance, the audio portion of a headset must sound
good to the user and the party on the far end. Sound is subjective and Cisco cannot guarantee the
performance of any headsets or handsets, but some of the headsets and handsets on the sites listed below
have been reported to perform well on Cisco Unified IP Phones.
Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified Communications Manager Release 7.0
OL-15985-01
Powering On the Cisco Unified Wireless IP Phone 7921G, page 3-16
Installing or Removing the Phone Battery, page 3-8
Using the Power Supply to Charge the Phone, page 3-9
Cisco Unified Wireless IP Phone 7921G Web Pages, page 3-15
Network Profile Menu on the Cisco Unified Wireless IP Phone 7921G, page 3-15
"Safety Information" section on page 3-5
"Using External Devices with Cisco Unified IP Phones" section on page 3-16
Installing the Cisco Unified Wireless IP Phone 7921G
Chapter 4, "Using the Cisco
for more information.
for more
3-15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cp-7921g-a-k9

Table of Contents