Cisco 7921G - Unified Wireless IP Phone VoIP Administration Manual page 152

Telephony Features Available for the Phone
Table 7-1 Telephony Features for the Cisco Unified Wireless IP Phone 7921G (continued)
Feature Description
Privacy Enables a user to allow or disallow other users of
shared-line devices to view the device all information or to
enable another user to barge into its active call.
Push to Talk Allows users to call a target phone number or group and
announce a message (similar to a two-way radio) by using
a configurable applications button.
Quality Reporting Allows users to use the QRT softkey on a phone to submit
Tool (QRT) information about problem phone calls. QRT can be
configured for either of two user modes, depending upon
the amount of user interaction desired with QRT.
Redial Allows users to call the most recently dialed phone number
by using a softkey option.
Restrict Data Rate Enables interoperability with devices that require low data
rates on the AP.
Ring setting Identifies ring type used for a line when a phone has
another active call.
Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified Communications Manager Release 7.0
7-12
Chapter 7 Configuring Features, Templates, Services, and Users
Configuration Reference
For more information refer to:
Cisco Unified Communications
•
Manager Administration Guide,
"Cisco Unified IP Phone
Configuration" chapter.
• Cisco Unified Communications
Manager System Guide, "Cisco
Unified IP Phones" chapter.
Cisco Unified Communications
•
Manager Features and Services Guide
"Barge and Privacy" chapter.
For more information, see
Services" section on page
Requires an XML application to provide
Push to Talk service.
For more information refer to:
Cisco Unified Communications
•
Manager System Guide, "Cisco
Unified IP Phones" chapter.
Cisco Unified Communications
•
Manager Features and Services
Guide, "Quality Report Tool" chapter.
Requires no configuration.
For more information, refer to Cisco
Unified Communications Manager
Administration Guide.
For more information refer to:
Cisco Unified Communications
•
Manager 4.x Administration Guide,
"Cisco Unified IP Phone
Configuration" chapter.
Cisco Unified Communications
•
Manager 5.x Administration Guide,
"Configuring Directory Numbers"
chapter.
Cisco Unified Communications
•
Manager Features and Services
Guide, "Custom Phone Rings"
chapter.
"Creating Custom Phone Rings"
•
section on page
"Setting Up
7-18.
7-22.
OL-15985-01