Navigating The Smt Interface; Figure 21-2 Password Screen; Table 21-1 Main Menu Commands - ZyXEL Communications ZyWall 10 User Manual

ZyWALL 10~100 Series Internet Security Gateway
For your first login, enter the default password "1234". As you type the password, the screen displays an "X"
for each character you type.
Please note that if there is no activity for longer than five minutes after you log in, your ZyWALL will
automatically log you out and display a blank screen. If you see a blank screen, press [ENTER] to bring up
the login screen again.

21.3 Navigating the SMT Interface

The SMT is an interface that you use to configure your ZyWALL.
Several operations that you should be familiar with before you attempt to modify the configuration are listed
in the table below.
OPERATION KEYSTROKES
Move down to [ENTER]
another menu
Move up to a [ESC]
previous menu
Move to a Press [SPACE BAR]
"hidden" menu to change No to Yes
then press [ENTER].
Move the cursor [ENTER] or
[UP]/[DOWN] arrow
keys
Entering Fill in, or press
information [SPACE BAR], then
press [ENTER] to
select from choices.
Required fields <? >
21-2
Enter Password : XXXX

Figure 21-2 Password Screen

Table 21-1 Main Menu Commands

To move forward to a submenu, type in the number of the desired
submenu and press [ENTER].
Press the [ESC] key to move back to the previous menu.
Fields beginning with "Edit" lead to hidden menus and have a
default setting of No. Press [SPACE BAR] to change No to Yes,
and then press [ENTER] to go to a "hidden" menu.
Within a menu, press [ENTER] to move to the next field. You can
also use the [UP]/[DOWN] arrow keys to move to the previous and
the next field, respectively.
You need to fill in two types of fields. The first requires you to type in
the appropriate information. The second allows you to cycle through
the available choices by pressing [SPACE BAR].
All fields with the symbol <?> must be filled in order be able to save
the new configuration.
DESCRIPTION
Introducing the SMT