Navigating The Smt Interface - ZyXEL Communications Prestige 316 User Manual

2.6

Navigating the SMT Interface

The SMT (System Management Terminal) is the interface that you use to configure your Prestige.
Several operations that you should be familiar with before you attempt to modify the configuration are
listed in the next table.
OPERATION
Move down to
another menu
Move up to a
previous menu
Move to a
"hidden" menu
Move the cursor
Enter information
Required fields
N/A fields
Save your
configuration
Exit the SMT
Hardware Installation and Initial Setup
Table 2-2
KEYSTROKE
[Enter]
To move forward to a submenu, type in the number of the
desired submenu and press [Enter].
[Esc] Press [Esc] to move back to the previous menu.
Press [space bar] Fields beginning with "Edit" lead to hidden menus and have a
to change No to default setting of No. Press [space bar] to change No to Yes,
Yes then press then press [Enter] to go to a "hidden" menu.
[Enter]
[Enter] or Within a menu, press [Enter] to move to the next field. You can
[Up]/[Down] arrow also use the [Up]/[Down] arrow keys to move to the previous
keys and the next field, respectively.
Fill in, or press You need to fill in two types of fields. The first requires you to
[space bar] to type in the appropriate information. The second allows you to
toggle cycle through the available choices by pressing [space bar].
All fields with the symbol <?> must be filled in order to be able to
?
< >
save the new configuration.
<N/A> Some of the fields in the SMT will show a <N/A>. This symbol
refers to an option that is Not Applicable.
[Enter]
Save your configuration by pressing [Enter] at the message
[Press ENTER to confirm or ESC to cancel]. Saving the data on
the screen will take you, in most cases to the previous menu.
Type 99, then Type 99 at the main menu prompt and press [Enter] to exit the
press [Enter] SMT interface.
Prestige 316 Broadband Sharing Gateway / Wireless LAN
Main Menu Commands
DESCRIPTION
2-7