The Firmware Screen - ZyXEL Communications P-870HN-51B - V1.0 Manual

Chapter 23 Tools

23.2 The Firmware Screen

Click Maintenance > Tools to open the Firmware screen. Follow the
instructions in this screen to upload firmware to your ZyXEL Device. The upload
process uses HTTP (Hypertext Transfer Protocol) and may take up to two minutes.
After a successful upload, the system will reboot.
Do NOT turn off the ZyXEL Device while firmware upload is in
progress!
Figure 133 Maintenance > Tools > Firmware
The following table describes the labels in this screen.
Table 87 Maintenance > Tools > Firmware
LABEL
Current
Firmware
Version
File Path
Browse...
Upload
238
DESCRIPTION
This is the present Firmware version and the date created.
Type in the location of the file you want to upload in this field or click
Browse ... to find it.
Click Browse... to find the .bin file you want to upload. Remember that
you must decompress compressed (.zip) files before you can upload
them.
Click Upload to begin the upload process. This process may take up to
two minutes.
P-870HN-51b User's Guide