Table of Contents
Advertisement
35.1 Overview
This chapter explains how to upload new firmware to your EMG. You can download new firmware
releases from your nearest Zyxel FTP site (or www.zyxel.com) to use to upgrade your device's
performance.
Only use firmware for your device's specific model. Refer to the label on
the bottom of your EMG.
35.2 The Firmware Screen
Click Maintenance > Firmware Upgrade to open the following screen. The upload process uses HTTP
(Hypertext Transfer Protocol) and may take up to two minutes. After a successful upload, the system will
reboot.
Do NOT turn off the EMG while firmware upload is in progress!
Figure 175 Maintenance > Firmware Upgrade
The following table describes the labels in this screen. After you see the firmware updating screen, wait
two minutes before logging into the EMG again.
Table 127 Maintenance > Firmware Upgrade
LABEL
Upgrade Firmware
Restore Default
Settings After
Firmware
Upgrade
Current
Firmware
Version
File Path
Firmware Upgrade
DESCRIPTION
Click the check box to have the EMG automatically reset itself after the new firmware is
uploaded.
This is the present Firmware version and the date created.
Type in the location of the file you wasnt to upload in this field or click Choose File to find it.
EMG6726/8726-B10A User's Guide
C
H A P T E R
264
35
Advertisement
Table of Contents
