The Wps Station Screen - ZyXEL Communications P-870HN-51B - V1.0 Manual

Chapter 7 Wireless LAN
Click Network > Wireless LAN >WPS. The following screen displays.
Figure 57 Network > Wireless LAN > WPS
The following table describes the labels in this screen.
Table 31 Network > Wireless LAN > WPS
LABEL
WPS Setup
Enable WPS
PIN Number
Generate
WPS Status
Apply

7.7 The WPS Station Screen

Use this screen to set up a WPS wireless network using either Push Button
Configuration (PBC) or PIN Configuration.
116
DESCRIPTION
Select the check box to activate WPS on the ZyXEL Device.
This shows the PIN (Personal Identification Number) of the ZyXEL
Device. Enter this PIN in the configuration utility of the device you want
to connect to using WPS.
The PIN is not necessary when you use WPS push-button method.
Click this button to have the ZyXEL Device create a new PIN.
This displays Configured when the ZyXEL Device has connected to a
wireless network using WPS or Enable WPS is selected and wireless or
wireless security settings have been changed. The current wireless and
wireless security settings also appear in the screen.
This displays Unconfigured if WPS is disabled and there is no wireless
or wireless security changes on the ZyXEL Device.
Click Apply to save your changes back to the ZyXEL Device.
P-870HN-51b User's Guide