Wan Service Statistics - ZyXEL Communications P-870HN-51B - V1.0 Manual

4.1.1 WAN Service Statistics

Click Status > WAN Service Statistics to access this screen. Use this screen to
view the WAN statistics.
Figure 21 Status > WAN Service Statistics
The following table describes the labels in this screen.
Table 5 Status > WAN Service Statistics
LABEL
Interface
Description
Received
Bytes
P-870HN-51b User's Guide
DESCRIPTION
This shows the name of the WAN interface used by this connection.
The default name ipoa*, pppoa*, atm* or ptm* indicates the DSL
port. pppx (where x starts from 0 and is the index number of PPP
connection on the ZyXEL Device) indicates a PPP connection via any one
of the WAN interface.
The number after the dot (.) represents the VLAN ID number assigned to
traffic sent through this connection. The number after the underscore
(_) represents the index number of connections through the same
interface.
(null) means the entry is not valid.
This shows the descriptive name of this connection.
0 and 35 or 0 and 1 are the default VPI and VCI numbers. The last
number represents the index number of connections over the same PVC
or the VLAN ID number assigned to traffic sent through this connection.
(null) means the entry is not valid.
This indicates the number of bytes received on this interface.
Chapter 4 Status Screens
59