The Wds Screen - ZyXEL Communications P-870HN-51B - V1.0 Manual

Click Network > Wireless LAN > WPS Station. The following screen displays.
Figure 58 Network > Wireless LAN > WPS Station
The following table describes the labels in this screen.
Table 32 Network > Wireless LAN > WPS Station
LABEL
Push Button
Or input
station's PIN
number

7.8 The WDS Screen

A Wireless Distribution System (WDS) is a wireless connection between two or
more APs. Use this screen to set up your WDS links between the ZyXEL Devices.
You need to know the MAC address of the peer device. Once the security settings
of peer sides match one another, the connection between the devices is made.
Note: You can use WDS only when wireless security is set to "No Security" or "WEP".
The wireless security settings apply to both WDS links and the connections
between the ZyXEL Device and any wireless clients.
P-870HN-51b User's Guide
DESCRIPTION
Click this button to add another WPS-enabled wireless device (within
wireless range of the ZyXEL Device) to your wireless network.
Note: You must press the other wireless device's WPS button within
two minutes of pressing this button.
Enter the PIN of the device that you are setting up a WPS connection
with and click Start to authenticate and add the wireless device to your
wireless network.
You can find the PIN either on the outside of the device, or by checking
the device's settings.
Note: You must also activate WPS on that device within two minutes
to have it present its PIN to the ZyXEL Device.
Chapter 7 Wireless LAN
117