No Security - ZyXEL Communications P-870HN-51B - V1.0 Manual

Table 23 Network > Wireless LAN > General
LABEL
Apply
Reset

7.4.1 No Security

Select No Security to allow wireless devices to communicate with the access
points without any data encryption or authentication.
Note: If you do not enable any wireless security on your ZyXEL Device, your network
is accessible to any wireless networking device that is within range.
Figure 49 Wireless LAN > General: No Security
The following table describes the labels in this screen.
Table 24 Wireless LAN > General: No Security
LABEL
Security
Mode
P-870HN-51b User's Guide
DESCRIPTION
Click this to save your changes back to the ZyXEL Device.
Click this to reload the previous configuration for this screen.
DESCRIPTION
Choose No Security from the drop-down list box.
Chapter 7 Wireless LAN
107