ZyXEL Communications P-870HN-51B - V1.0 Manual page 83

Note: If you configure only one IPoA or IPoE connection using the ATM interface on
the ZyXEL Device, you must enter the static DNS server address.
Figure 40 WAN Configuration: DNS Server: PPPoE, PPPoA, IPoE or IPoA
The following table describes the labels in this screen.
Table 20 WAN Configuration: DNS Server: PPPoE or IPoE
LABEL
Obtain DNS info
from a WAN
interface
WAN interface
selected
Use the following
Static DNS IP
address
Primary DNS
server
Secondary
DNS server
Back
Next
P-870HN-51b User's Guide
DESCRIPTION
Select this to have the ZyXEL Device get the DNS server addresses
from the ISP automatically.
This displays the WAN interface you selected in the previous screen.
Select this to have the ZyXEL Device use the DNS server addresses
you configure manually.
Enter the first DNS server address assigned by the ISP.
Enter the second DNS server address assigned by the ISP.
Click this button to return to the previous screen.
Click this button to continue.
Chapter 5 WAN Setup
83