Adding A New Mac Filtering Rule - ZyXEL Communications P-870HN-51B - V1.0 Manual

Use this screen to change your ZyXEL Device's MAC filter settings. Click the Edit
button in the Wireless LAN > General screen. The following screen displays.
Figure 53 Wireless LAN > MAC Filter
The following table describes the labels in this screen.
Table 28 Wireless LAN > MAC Filter
LABEL
MAC Restrict
Mode
#
MAC
Address
Modify
Back
Add

7.4.6 Adding a New MAC Filtering Rule

Click the Add button in the MAC Filter screen. The following screen displays.
Figure 54 Wireless LAN > MAC Filter > Add
P-870HN-51b User's Guide
DESCRIPTION
Define the filter action for the list of MAC addresses in the table below.
Select Disabled to turn off MAC address filtering.
Select Allow to permit access to the ZyXEL Device, MAC addresses not
listed will be denied access to the ZyXEL Device.
Select Deny to block access to the ZyXEL Device, MAC addresses not listed
will be allowed to access the ZyXEL Device
This is the index number of the MAC address.
This is the MAC addresses of the wireless devices that are allowed or denied
access to the ZyXEL Device.
Click the Remove icon to delete the entry.
Click this to return to the previous screen without saving changes.
Click this to create a new MAC filtering rule.
Chapter 7 Wireless LAN
113