Default Gateway; Dns Server - ZyXEL Communications P-870HN-51B - V1.0 Manual

Chapter 5 WAN Setup
The following table describes the labels in this screen.
Table 18 WAN Configuration: NAT, IGMP Multicast and Firewall Activation: IPoE
LABEL
Enable NAT
Enable Fullcone
NAT
Enable Firewall
Enable IGMP
Multicast Proxy
Back
Next

5.5.1.5 Default Gateway

The screen is not available when you select Bridging in the WAN Service
Configuration screen.
Figure 39 WAN Configuration: Default Gateway: PPPoE, PPPoA, IPoE or IPoA
The following table describes the labels in this screen.
Table 19 WAN Configuration: Default Gateway: PPPoE or IPoE
LABEL
Selected WAN
Interface
Back
Next

5.5.1.6 DNS Server

The screen is not available when you select Bridging in the WAN Service
Configuration screen.
82
DESCRIPTION
Select this check box to activate NAT on this connection.
Select this check box to activate full cone NAT on this connection.
This field is available only when you select Enable NAT.
Select this check box to activate Firewall on this connection.
Select this check box to have the ZyXEL Device act as an IGMP proxy
on this connection. This allows the ZyXEL Device to get subscribing
information and maintain a joined member list for each multicast
group. It can reduce multicast traffic significantly.
Click this button to return to the previous screen.
Click this button to continue.
DESCRIPTION
Select a WAN interface through which you want to forward the traffic.
Click this button to return to the previous screen.
Click this button to continue.
P-870HN-51b User's Guide