Firmware Upgrade; Chapter 27 Firmware Upgrade; Overview; The Firmware Screen - ZyXEL Communications P-660HN-51 User Manual

27.1 Overview

This chapter explains how to upload new firmware to your Zyxel Device. You can download new
firmware releases from your nearest Zyxel FTP site (or www.zyxel.com) to use to upgrade your device's
performance.
Only use firmware for your device's specific model. Refer to the label on
the bottom of your Zyxel Device.

27.2 The Firmware Screen

Click Maintenance > Firmware Upgrade to open the following screen. The upload process uses HTTP
(Hypertext Transfer Protocol) and may take up to two minutes. After a successful upload, the system will
reboot.
Do NOT turn off the Zyxel Device while firmware upload is in progress!
Figure 116 Maintenance > Firmware Upgrade
The following table describes the labels in this screen.
Table 96 Maintenance > Firmware Upgrade
LABEL
Current Firmware
Version
File Path
Browse...
Upload
After you see the firmware updating screen, wait two minutes before logging into the Zyxel Device
again.

Firmware Upgrade

DESCRIPTION
This is the present Firmware version and the date created.
Type in the location of the file you want to upload in this field or click Browse ... to find
it.
Click this to find the .bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Click this to begin the upload process. This process may take up to two minutes.
P-660HN-51 User's Guide
C
H A P T E R
216
27