Wan Interface; Wan Connection Configuration - ZyXEL Communications P-870HN-51B - V1.0 Manual

Table 12 Internet Connection
LABEL
IGMP
NAT
Firewall
Modify
Add

5.5.1 WAN Connection Configuration

Click the Edit or Add button in the WAN Service screen to configure a WAN
connection.

5.5.1.1 WAN Interface

This screen displays when you add a new WAN connection.
Figure 32 WAN Configuration: WAN Interface
The following table describes the labels in this screen.
Table 13 WAN Configuration: WAN Interface
LABEL
Select a layer 2
interface for this
service
Back
Next
P-870HN-51b User's Guide
DESCRIPTION
This shows whether IGMP (Internet Group Multicast Protocol) is
activated or not for this connection. IGMP is not available when the
connection uses the bridging service.
This shows whether NAT is activated or not for this interface. NAT is
not available when the connection uses the bridging service.
This shows whether the firewall is activated or not for this connection.
The firewall is not available when the connection uses the bridging
service.
Click the Edit icon to configure the WAN connection.
Click the Remove icon to delete the WAN connection.
Click Add to create a new connection.
DESCRIPTION
Select ptm0 to use the DSL port as the WAN port and use the VDSL
technology for data transmission.
Select atm0 to use the DSL port as the WAN port and use the ADSL
technology for data transmission.
Click this button to return to the previous screen.
Click this button to continue.
Chapter 5 WAN Setup
75