Firmware Upgrade; Chapter 34 Firmware Upgrade; Overview; The Firmware Screen - ZyXEL Communications XMG3512-B10A User Manual

34.1 Overview

This chapter explains how to upload new firmware to your XMG. You can download new firmware
releases from your nearest Zyxel FTP site (or www.zyxel.com) to use to upgrade your device's
performance.
Only use firmware for your device's specific model. Refer to the label on
the bottom of your XMG.

34.2 The Firmware Screen

Click Maintenance > Firmware Upgrade to open the following screen. The upload process uses HTTP
(Hypertext Transfer Protocol) and may take up to two minutes. After a successful upload, the system will
reboot.
Do NOT turn off the XMG while firmware upload is in progress!
Figure 151 Maintenance > Firmware Upgrade
The following table describes the labels in this screen. After you see the firmware updating screen, wait
two minutes before logging into the XMG again.
Table 120 Maintenance > Firmware Upgrade
LABEL
Upgrade Firmware
Restore Default
Settings After
Firmware
Upgrade
Current
Firmware
Version
File Path

Firmware Upgrade

DESCRIPTION
Click the check box to have the XMG automatically reset itself after the new firmware is
uploaded.
This is the present Firmware version and the date created.
Type in the location of the file you wasnt to upload in this field or click Choose File to find it.
XMG3512-B10A User's Guide
C
H A P T E R
233
34