Tutorials; Chapter 2 Tutorials; How To Set Up A Wireless Network; Example Parameters - ZyXEL Communications P-870HN-51B - V1.0 Manual

C
H A P T E R
This chapter shows you how to set up a wireless network (see
to set up multiple VDSL connection groups (see

2.1 How to Set up a Wireless Network

This tutorial gives you examples of how to set up an access point and wireless
client for wireless communication using the following parameters. The wireless
clients can access the Internet through an AP wirelessly.

2.1.1 Example Parameters

SSID
Security
802.11 mode
An access point (AP) or wireless router is referred to as "AP" and a computer with
a wireless network card or USB/PCI adapter is referred to as "wireless client" here.
We use the ZyXEL Device web screens and M-302 utility screens as an example.
The screens may vary slightly for different models.

2.1.2 Configuring the AP

Follow the steps below to configure the wireless settings on your AP.
P-870HN-51b User's Guide
SSID_Example3
WPA-PSK
(Pre-Shared Key: ThisismyWPA-PSKpre-sharedkey)
IEEE 802.11b/g
2

Tutorials

page 27) and how
page 37).
27